Cameron Fully Welded Ball Valve

Engineered for heavy duty, maintenance-free performance, Cameron Fully Welded Ball Valve combines the strength of forged components with a lightweight and compact spherical design.

Cameron Fully Welded Ball Valve satisfies ANSI 150 through 2500 and API 2000 through 10000 standards. Made of forged steel to assure uniform fine grain structure and toughness, they may be specified in sizes from 2" to 56".

Grove Side Entry Ball Valve

Features:
• Size range: 1/2" to 60”
• ANSI Classes: 150 to 2500
• Trunnion mounted
• Double barrier stem seals
• Stem separate from the ball
• Anti-blow-out stem design
• Stem emergency grease fitting

Body Structure:
• The body is made of three forged parts and the bolted construction allows disassembly on-site for inspections and possible repairs.
• A body drain is located in the lowest part of the body cavity and consists of a NPT drain valve with safety plug.

Orbit Rising Stem Ball Valve

Orbit Rising Stem Ball Valve offers a unique, highly-reliable valve with positive shut-off and repeated re-sealing capability. The key to the success of the valve is the rising stem that lifts the ball away from its seat before turning, so that the seats are protected from wear and degradation from the rotation.

Features:
• Multiple sizes and pressure ratings
• -50 deg F to 500 deg F (-101 deg C to 427 deg C) operating temperatures
• Unique design mechanically energizes seal by cam action
• Single-seat design
• Bi-directional sealing with zero leakage
• Injectable packing
• Self-cleaning
• In-line repairable

General Valve Twin Seal

Rapid seal abrasion is inherent in the designs of most ball and gate valves. General Valve's Twin Seal stops this constant wear by using two seating slips mounted independently on a tapered plug by dovetails.

Specifications:
• 40 percent opening: sizes 6 in. to 24 in., 150 lbs to 600 lbs
• 70 percent opening: sizes 2 in. to 42 in., 150 lbs to 1500 lbs
• 100 percent opening: sizes 2 in. to 24 in., 150 lbs to 600 lbs

TruSeal DBB Plug Valve

The TruSeal positive shut-off, double block and bleed valve was developed for multi-products fuel manifolds. Busy manifolds must operate frequently, switching from product to product, often with power actuators and sometimes without human supervision. Valves that can be trusted to seal drop-tight, every time, will avoid the expensive consequences of contaminated fuel. Liquid fuels that move through pipeline manifolds are reliably segregated by provable, zero-leakage, TruSeal valves. Every TruSeal valve in the manifold has assured, double block and bleed shut-off that proves total isolation of each product.